Capacitive Proximity Level Sensor for 200°C Hot Melt Glue Machines
1. Why You Need It
Hot melt glue machines operate at high temperature, and the molten
adhesive is both hot and sticky — conditions that destroy ordinary
level sensors. This capacitive proximity level sensor is engineered
for 200 °C high-temperature service, with a 316L + Teflon probe
that resists heat and adhesion. It provides reliable glue level
detection in hot melt machines, preventing dry-run and overflow in
the melt tank.
2. Working Principle
The sensor detects the molten glue level by sensing capacitance
change at the probe, switching its NPN/PNP output when the adhesive
reaches the set point. The 316L stainless steel and Teflon probe
withstand both high temperature and the sticky molten medium, while
the FEP coaxial cable and ABS control box protect the electronics.
A fast <1 s response and reverse/overload/short-circuit
protection ensure dependable operation.
3. Key Advantages
- 200 °C high-temperature rated
- Built for hot melt glue machines
- 316L + Teflon probe
- NPN + PNP output
- DC 12-24 V supply
- <1 s response time
- Reverse / overload / short-circuit protection
- FEP coaxial cable probe output
- ABS control box
- Reliable in molten adhesive
Common Pain Points & Solutions
| Problem | Conventional Issue | Our Solution | Result |
|---|
| Hot melt glue machines | Sensors overheat | 200 °C rated design | Reliable at high temperature |
| Molten adhesive | Probes foul with glue | 316L + Teflon probe | Adhesion-resistant detection |
| Dry-run / overflow | No melt tank monitoring | High/low level switch | Prevents dry-run and overflow |
| Sensor electrical faults | Unprotected circuits | Reverse/overload/short protection | Robust, long-life operation |
Application Cases
Industry: Adhesive
Application: Hot melt glue machine
Medium: Molten hot melt glue
Pressure Range: Atmospheric
Operating Temperature: up to 200 °C
Installation Environment: Glue machine
Customer Challenge: Detect melt tank glue level
Previous Problem: Standard sensor failure
Solution: 200°C capacitive sensor
Installation Location: Melt tank
Result: Reliable glue level detection
Industry: Packaging
Application: Hot melt adhesive applicator
Medium: Hot melt adhesive
Pressure Range: Atmospheric
Operating Temperature: 150 to 200 °C
Installation Environment: Packaging line
Customer Challenge: Adhesive level control
Previous Problem: Sensor overheating
Solution: High-temp proximity sensor
Installation Location: Adhesive applicator
Result: Continuous adhesive level
Industry: Assembly
Application: Bonding glue station
Medium: Hot melt glue
Pressure Range: Atmospheric
Operating Temperature: 150 to 200 °C
Installation Environment: Assembly line
Customer Challenge: Glue level in melt pot
Previous Problem: Sensor fouling
Solution: 316L+Teflon sensor
Installation Location: Melt pot
Result: Reliable melt pot level
Industry: Woodworking
Application: Edge banding glue machine
Medium: Hot melt glue
Pressure Range: Atmospheric
Operating Temperature: 150 to 200 °C
Installation Environment: Woodworking line
Customer Challenge: Melt tank level monitoring
Previous Problem: Manual checking
Solution: High-temp level sensor
Installation Location: Edge bander melt tank
Result: Automated level monitoring
Technical Specifications
| Specification | Value |
|---|
| Product Type | Capacitive proximity level sensor |
| Temperature Rating | 200 °C |
| Probe Material | 316L stainless steel + Teflon |
| Output | NPN + PNP |
| Supply Voltage | DC 12-24 V |
| Response Time | <1 s |
| Protection | Reverse / overload / short circuit |
| Control Box | ABS |
FAQ
Q: What is a capacitive proximity level sensor?
A capacitive proximity level sensor detects the presence of
material near its probe by sensing capacitance change, switching
its output when the medium reaches the set point. For hot melt glue
machines, it detects the molten adhesive level in the melt tank.
Q: Can it really handle 200 °C?
Yes. It is rated for 200 °C high-temperature service, making it
suitable for hot melt glue machines where molten adhesive is held
at elevated temperatures that would damage ordinary sensors.
Q: Why are 316L and Teflon used?
316L stainless steel provides structural strength and heat
resistance, while Teflon (PTFE) resists adhesion from the sticky
molten glue and withstands high temperature. Together they give a
probe that survives both heat and adhesive build-up.
Q: What output does it provide?
It provides NPN and PNP dual output, compatible with both sinking
and sourcing PLC inputs. This allows the sensor to interface with
the glue machine's control system directly.
Q: What protection does it have?
It has reverse polarity, overload and short-circuit protection,
plus a fast <1 s response time. These protections ensure
dependable operation and prevent damage from electrical faults.
Q: What power supply does it need?
It operates on DC 12-24 V, a flexible range that covers common
industrial supplies used in hot melt glue and packaging equipment.
Q: How does it prevent dry-run and overflow?
By switching at set high and low glue levels in the melt tank, it
triggers alarms or feed control to prevent the tank from running
dry or overflowing, protecting both product quality and the
machine.
Q: What is the probe cable?
The probe output uses a 1 m FEP coaxial cable, which is
heat-resistant and suitable for the high-temperature environment of
hot melt glue machines. The control box is ABS for durability.
Q: How is it installed?
It is installed through the melt tank wall with the probe extending
into the molten glue, and the cable routes to the ABS control box.
The NPN/PNP output connects to the machine's PLC.
Q: Where is it used?
It is used in hot melt glue machines, hot melt adhesive
applicators, bonding glue stations and edge banding machines. It
provides reliable high-temperature level detection for molten
adhesive.
